$20.00
We will hold your cart for 15:00.
The Tekton SID92336 17-piece 1/2 inch drive SAE shallow impact socket set delivers dual-marked, round-off-proof sockets in a case for just $37.50 — half the $75.00 price — buy online now for complete impact coverage.
Categories : Sockets and Socket Sets
SKU : DRI-SOC-232
The Tekton SID92336 1/2 Inch Drive Impact Socket Set, 17-Piece is the complete SAE shallow socket system for impact wrench and ratchet work on 5/16 through 1-1/4 inch fasteners. At $37.50 versus a $75.00 compare-at price, this is the deal to buy online today — half-price pro socket coverage.
Shoppers searching Tekton 1/2 drive impact socket set torque specs should know the design basis: sockets are made from 50BV30 Cr-V or 4140 Cr-Mo steel (by size), heat-treated for impact duty, and 6-point geometry loads fastener flats. Torque ratings follow Tekton's published SID92336 chart; the 6-point radiused corner design is what lets each size sustain high impact torque without fastener round-off.
Radiused 6-point corners apply force to the fastener's flat sides rather than its corners, protecting bolts under maximum torque.
Every socket carries both a high-visibility laser marking and a permanent stamped marking — no more squinting in a dim shop.
Despite shallow overall length, the interior well extends fully for better fastener engagement in more situations, including longer bolts and studs.
Smooth drive-end walls support friction ring retention and a detent pin hole works with pin-style anvils — compatible with every 1/2 inch drive impact wrench.
Automotive repair, suspension and brake work, small-engine service, and home garage impact driving on SAE hardware.
$37.50 today — 50% off the $75.00 list. Apply coupon SAVE15 for an extra 15% off, and this set exceeds the $45.00 free-shipping threshold when bundled. Compare socket set prices and buy online while the sale lasts.
17-piece SAE coverage from 5/16 to 1-1/4 inch at $37.50 — a full 50% off the $75.00 list price
Radiused 6-point corners and impact-grade Cr-V/Cr-Mo steel prevent round-off under maximum torque
Dual laser and stamped markings plus friction ring / detent pin compatibility with coupon SAVE15 stacking extra savings
Model: SID92336
Steel: 50BV30 Cr-V or 4140 Cr-Mo (by size)
Points: 6-point
Coating: Manganese phosphate, corrosion-resistant
Drive Size: 1/2 inch
Sale Price: $37.50 USD
Size Range: 5/16 in. – 1-1/4 in.
Piece Count: 17 sockets + carrying case
Size System: SAE
Product Type: Shallow impact socket set
Compare-At Price: $75.00 USD
Anvil Compatibility: Friction ring and detent pin
Seller: Driven Fastener Works
MPN: SID92336
When comparing 1/2 inch drive impact socket sets, the SID92336 delivers complete 17-piece SAE coverage, impact-grade alloys, and 6-point round-off protection for $37.50 — half of the $75.00 list.
Shoppers researching the SID92336 torque chart should note the per-size steel selection (50BV30 Cr-V vs. 4140 Cr-Mo) and radiused 6-point geometry that keeps force on fastener flats under heavy impact loads.
50% off, coupon SAVE15 for 15% more, and free shipping over $45.00. Buy online now — this sale won't last.
Buy the Tekton SID92336 17-piece impact socket set right here at Driven Fastener Works with online checkout and shipping.
It's $37.50, down from a $75.00 compare-at price — at roughly $2.20 per socket including the case, it undercuts most comparable 1/2 inch drive SAE impact sets.
Sockets are made from impact-grade 50BV30 Cr-V or 4140 Cr-Mo steel with 6-point geometry that loads fastener flats; refer to Tekton's published SID92336 torque chart for per-size proof-load ratings. The design supports standard 1/2 inch drive impact wrench use.
Yes — this set is already 50% off, coupon code SAVE15 takes an additional 15% off, and orders over $45.00 ship free.
It fits 5/16 through 1-1/4 inch SAE hex fasteners and works with both friction ring and detent pin anvils on any 1/2 inch drive impact wrench or ratchet.
Seventeen sockets from 5/16 to 1-1/4 for under forty bucks is honestly absurd value. The dual markings are easy to read even in a dim garage, the 12-point design hasn't rounded a single fastener, and the case keeps everything organized. I've run every size through my impact wrench on suspension and axle work with zero signs of wear. This replaced a motley collection of hand-me-down sockets that were all rounded out.
Everything fits the case perfectly and the sockets are tough. No regrets.
I bought this to round out my 1/2-inch drive impact collection and it covers every common SAE size I encounter on my truck and lawn equipment. The laser etchings are clear and haven't faded despite being covered in grease and scrubbed repeatedly. Impact rated and no cracking after heavy use. The latch on the case feels a little flimsy, but it's the sockets I paid for.
I finally have time for all the projects I put off for thirty years, and this set means I never have to stop mid-job to hunt for a socket. Well made, clearly marked, and the 6-point contact area grips even older worn hardware. Wonderful value for a retiree on a budget.
The sockets themselves are solid and hold up to my impact gun. The case hinge cracked within a week though, so now they live in a drawer.
Set this up as part of a starter kit for my son's first apartment garage. He's torn through brake jobs, mower blades, and a trailer rebuild with these. No rounding, no cracks, no complaints from him.
Not Snap-on, but it doesn't pretend to be. For weekend wrenching these take impact abuse without issue. Dual size markings are genuinely useful when you're in a hurry.
My set arrived with the 11/16 socket missing from the case. The rest are fine but QC clearly slipped.
Half off list price, impact rated, and the 12-point walls have saved several rusty bolts on my farm equipment. Best tool purchase this year.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Shop 930 tools from Tekton, GearWrench, and Crescent with clear specs, honest pricing, and support after the sale.
Email: support@drivenfastener.shop
Address: 1420 Rivet Avenue, Suite 7, Dayton, OH 45402, United States